CV9 Master Catalog

Specifications subject to change without notice or incurring obligation 4 Hi-Power ™ Cylinders 749 Series Sensor with Integral Clamp for 4" to 12" Bore Cylinders (shown prewired) 9-2A197 Series Sensor & Clamp for 1-1/8" to 3" Bores Socket Head Screw Quick Disconnect Sensor Shown Order Sensors and Sensor Clamps Separately Integral Clamp Piston Magnet, Rubber Bonded Barium Ferrite Tie Rod, Stainless Steel Cylinder Head Cylinder Tube T Sensor WARNING This cylinder is equipped with a Magnetic Piston for use with Magnetically Operated Sensors. Other Magnetic Sensitive Devices Should be Kept at a Distance to Avoid Inadvertent Operation. 8", 10" & 12" Bores 4" – 6" Bores 9 foot prewired sensor Female Cordsets available in 1, 2, & 5 meter lengths 1-1/8" – 3" Bores Sensor Clamp Piston Magnet Tie Rod, Stainless Steel Cylinder Head Cylinder Tube T Sensor T • Option -E consists of a magnet bonded into the piston head.When the piston magnet moves past an external sensor, the magnetic field activates the sensor without physical contact. • Mounting –The sensor is attached to a 2-part clamp that attaches rigidly to a tie rod and can be positioned anywhere along the length of the cylinder for very precise signaling. • Two sensor styles are used – (a) the 9-2A197 Series for 1-1/8" thru 3" bores requires a tie rod clamp, and (b) the 749 Series which accommodates the larger diameter tie rods of the 4" thru 12" bores with an integral clamp. • Reliability – The annular piston magnet is permanently bonded into a groove in the piston. It is a polarized permanent magnet of rubber bonded barium ferrite that is very stable and is not affected by shock. Under normal usage it will remain magnetized indefinitely. • Warning – External magnetic fields and/or ferrous objects may affect the strength of the piston magnet therefore affecting sensor actuation and piston position indication. Labels noting this are affixed to the cylinder. • Please note there is an increase in base length of the cylinder to accomodate the magnet. Using the table below add 'L' to Dimension 'A' on pages 4.5 & 4.6. 5-3-12 Bore 1-1/8" 1-5/8" 2-1/2" 3" 4" 5" 6" 8" 10" 12" T .38 .38 .38 .38 .36 .25 .14 .10 .38 .38 L (for Series HP) 1 1 1 1 1 1 1" NA NA NA L (for Series THP) .81 .75 .81 .81 .81 .75 .63 1.25 1.00 1.00 L (for Series UHP) 0 0 0 0 0 0 0 0 0 0 (T) Clamp Stick Out & (L) Length Adder to Dim. 'A' Pgs. 4.5 & 4.6 MAGNETIC PISTON Option -E Sensor & Clamp Ordering Guide Warning! Do not exceed sensor ratings. Permanent damage to sensor may occur. Power supply polarity MUST be observed for proper operation of sensors. See wiring diagrams included with each sensor. Sensor housing rated NEMA 6/IP67. Length 1 Meter 2 Meter 5 Meter Part No. CFC-1M CFC-2M CFC-5M Length 2 Meter 5 Meter Part No. CFC-2M-12 CFC-5M-12 Temperature Range : –20° to + 80°C (–4° to + 176°F) Female Cordsets for 9-2A197 Series Quick Disconnect Sensors Female Cordsets for 749 Series Quick Disconnect Sensors Product Reed Switch Electronic Electronic 5-240 VDC/VAC, 1 Amp Max., 30 Watt Max., SPST N.O., 3.0 Voltage Drop Sourcing, PNP, 6-24 VDC, 1.0 Amp Max., 0.5 Voltage Drop Sinking, NPN, 6-24 VDC, 1.0 Amp Max., 0.5 Voltage Drop Reed Switch Electronic Electronic Electrical Characteristics 5-120 VDC/VAC, 0.5 Amp Max., 10 Watt Max., SPST N.O., 3.5 Voltage Drop Sourcing, PNP, 6-24 VDC, 0.5Amp Max., 1.0 Voltage Drop Sinking, NPN, 6-24VDC, 0.5Amp Max., 1.0 Voltage Drop 5-240 VDC/VAC, 1 Amp Max., 30 Watt Max., SPST N.O., 3.0 Voltage Drop Sourcing, PNP, 6-24 VDC, 1.0 Amp Max., 0.5 Voltage Drop Sinking, NPN, 6-24 VDC, 1.0 Amp Max., 0.5 Voltage Drop Reed Switch Electronic Electronic Quick Discon. P/N 9-2A197-1304 9-2A197-1333 9-2A197-1334 9 ft. Prewired P/N 9-2A197-1004 9-2A197-1033 9-2A197-1034 749-000-504 749-000-531 749-000-532 749-000-004 749-000-031 749-000-032 749-111-504 749-111-531 749-111-532 749-111-004 749-111-031 749-111-032 LED Lighted Magnetic Piston Position Sensors: Bores 1-1/8" – 3" LED Lighted Magnetic Piston Position Sensors: Bores 4" – 8" LED Lighted Magnetic Piston Position Sensors: Bores 10" & 12" 9-2A197 Series Sensor Mounting Clamps – Part Number 800-200-000 4.9 T

RkJQdWJsaXNoZXIy NDI5NDE=