CV9 Master Catalog

1 Specifications subject to change without notice or incurring obligation Pancake ® Cylinders 1.8 Option Information Original & “T” Series 8 Bores, 1/2" – 4" 4-23-04 MALE ROD THREAD Single Rod -MR Double Rod, Rod End Only -MR Double Rod, Cap End Only -MR1 Double Rod, Both Ends -MR2 SUFFIX OPTIONS MODEL NUMBER SUFFIX A high strength stud is threaded into the standard female rod end and retained with Loctite ® . This method eliminates the small diameter thread relief area normally required when machining male threads. This provides a much stronger rod end which can be repaired, rather than replacing the complete rod, should the thread be damaged. Available on all series, bore, stroke and action combinations. See Option Specifications pages of desired bore and action for complete dimensional details. SUFFIX OPTIONS TEFLON ® O'RING SEALS (+400° to +500° F) -T VITON ® O'RING SEALS (-15° to +400° F) -V QUAD SEALS (-30° to +250° F) -Q NONROTATING Single Acting -NR For Double Acting, Nonrotating SEE Action -XK, -XDRK on pages 1.5 and 1.6 A Hex Rod of stainless steel in a broached, hard anodized aluminum endcap replaces the round rod in Single Acting, Spring Retracted (Actions -O, -ODR) cylinders. Available in all series, bores 1/2" (5), 3/4" (7), all strokes, actions -O, -ODR. See Option Specifications pages of desired bore and action for complete dimensional details. A QUAD seal replaces the standard O'Ring on the piston only. Standard seal material is Buna-N (-30° to +250°F). For other materials consult engineering. Available on all series, bore, stroke and action combinations. See Standard Specifications pages of desired bore and action for complete dimensional details. There are no dimensional changes from standard. For elevated temperatures (–15° to + 400°F) or compatibility with exotic medias. Consult engineering for compatibility information. Available on all series, bore, stroke and action combinations. See Standard Specifications pages of desired bore and action for complete dimensional details. There are no dimensional changes from standard. For elevated temperatures (+400° to +500° F) or compatibility with exotic medias. Consult engineering for compatibility information. NOTE: Teflon seals are NOT for low friction. This seal material assumes the shape of the rectangular groove, exhibits no “memory”and will not return to round O'Ring cross section. Therefore the piston and rod seals may exhibit some leakage. This is even more pronounced in applications that require thermal cycling over wide temperature ranges. They are not, therefore, recommended for such applications. Available on all series, bores 1-1/8" (121) and larger, all strokes and actions -X, -XDR. See Standard Specifications pages of desired bore and action for complete dimensional details. There are no dimensional changes from standard.

RkJQdWJsaXNoZXIy NDI5NDE=