CV9 Master Catalog

Specifications subject to change without notice or incurring obligation 5 Square 1 ® — Multi-Power ® Specifications Media.................................................... Air Recommended Minimum Pressure ...... 20 psi Maximum Operating Pressure.............. 150 psi Ambient & Media Temperature ............. -25° to +250 ° F Prelubrication ....................................... Magnalube ® -G Grease Airline Lubrication................................. Recommended Series MQ, MQF, MQL Ordering Example: MQL GW 1-1/8 X 1 X 2 X 1 - DR - MR1 Model number code above describes Square 1 ® Multi-Power ® side lug mount cylinder with “G” rod extension on rod end; “W” rod extension on cap end; 1-1/8" bore; 1" stroke; 2 stages extend; 1 stage retract; double rod; male rod on cap end. ‡ Area = Total effective piston area, square inches. † Equivalent Bore = Bore required for a single piston cylinder. MQ MQW MQF MQFW MQL MQLW Available Strokes 1/8" 1/4" 1/2" 3/4" 1" 1-1/2" 2" 2-1/2" • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Sizing Square 1 ® – Multi-Power ® Cylinders Stages Area Equivalent Force @ Retract Series Bore (Piston) ‡ Bore † 60 psi Area 3/4" 2 .80 1 48 .36 7/8" 2 1.12 1-3/16 67 .52 1-1/8" 2 1.79 1-1/2 107 .80 1-5/8" 2 3.83 2-1/8 229 1.76 2" 2 5.84 2-5/8 350 2.70 How to Order OPTIONS See pages 5.20 - 5.22 Description Specify Male Rod Thread Single Rod -MR Double Rod, Rod End -MR Double Rod, Cap End -MR1 Double Rod, Both Ends -MR2 Viton Seals:-15° to + 400°F -V Metric Rod Thread -M Port Positions (page 5.19) -1B External Guide, Nonrotating -G Double Rod -DR Magnetic piston and -E sensor mounting slot(s) Order sensors separately. X – 1-1/8 1 DR - MR1 Mounting MQ Side Tap MQF Face MQL Side Lug Bore 3/4" 7/8" 1-1/8" 1-5/8" 2" Rod Extension Single Rod Models Blank –for standard extension per dimension "G" W - for Extension to dimension "W" Double Rod Models Blank –"G" extension both ends W –"W" extension both ends Standard Strokes Inches MQL GW For strokes available See chart above GW – "G" extension on rod end; "W" extension on cap end WG – "W" extension on rod end; "G" extension on cap end Model Number Code X 2 X 1 Stages Stages Extend Retract 2 X 1 1 X 2 Standard available combinations are listed above. 5.18 5-21-13

RkJQdWJsaXNoZXIy NDI5NDE=