CV9 Master Catalog

Specifications subject to change without notice or incurring obligation 5 Sensor & Clamp Ordering Guide Warning! Do not exceed sensor ratings. Permanent damage to sensor may occur. Power supply polarity MUST be observed for proper operation of sensors. See wiring diagrams included with each sensor. Temperature Range : –20° to + 80°C (–4° to + 176°F) Sensor housing rated NEMA 6/IP67. 5-21-13 Electrical Characteristics 5-120 VDC/VAC, 0.5 Amp Max., 10 Watt Max., SPST N.O., 3.5 Voltage Drop Sourcing, PNP, 6-24 VDC, 0.5 Amp Max., 1.0 Voltage Drop Sinking, NPN, 6-24VDC, 0.5 Amp Max., 1.0 Voltage Drop Quick Disconnect Part Number. 9-2A197-1304 9-2A197-1333 9-2A197-1334 Prewired 9 ft. Part No. 9-2A197-1004 9-2A197-1033 9-2A197-1034 Product Type Reed Switch Electronic Electronic LED Lighted Magnetic Piston Position Sensors For all MLS & MLR Models Order Part Number 800-200-000 Length 1 Meter 2 Meter 5 Meter Part Number CFC-1M CFC-2M CFC-5M Sensor Mounting Clamp - for all MLS & MLR Models Female Cordsets for Quick Disconnect Series MLR & MLS Option Specifications 2-1/2" bore model shown with 2 prewired electronic sensors and mounting clamps Female Cordsets available in 1, 2, & 5 meter lengths 9 foot prewired sensor 2-Piece Sensor Clamp shown with quick disconnect sensor snapped in place Socket Head Screw Quick Disconnect Sensor Shown WARNING This cylinder is equipped with a Magnetic Piston for use with Magnetically Operated Sensors. Other Magnetic Sensitive Devices Should be Kept at a Distance to Avoid Inadvertent Operation. Model MLR2 MLS2 MLR2-1/2 MLS2-1/2 MLR3 MLS3 MLR4 MLS4 T .50" .50" .50" .10" .50" .30 .30" .30" Sensor Clamp Stick Out Dimensions Sensor Magnet, Rubber Bonded Barium Ferrite Tie Rod, Stainless Steel Cylinder Head Cylinder Tube Piston Rod Piston Clamp T T Sensor Magnet, Rubber Bonded Barium Ferrite Tie Rod, Stainless Steel Cylinder Head Cylinder Tube Piston Rod Piston Clamp T Top View Round Head Style Top View Square Head Style 5.28 • Option -E consists of a magnet bonded into the piston head.When the piston magnet moves past an external sensor, the magnetic field activates the sensor without physical contact. • Mounting – The sensor snaps into a 2-part clamp that attaches rigidly to any of the tie rods and can be positioned anywhere along the length of the cylinder. • Reliability – The annular piston magnet is permanently bonded into a groove in the piston. It is a polarized permanent magnet of rubber bonded barium ferrite that is very stable and is not affected by shock. Under normal usage it will remain magnetized indefinitely. • Warning – External magnetic fields and/or ferrous objects may affect the strength of the piston magnet therefore affecting sensor actuation and piston position indication.Warning labels (shown left) are affixed to the cylinder. • Please note there is an increase in base length of the cylinder to accomodate the magnet. Add 1.00" to Dimension 'B' on pages 5.24. Magnetic Piston Option -E (Order Sensors and Sensor Clamps Separately)

RkJQdWJsaXNoZXIy NDI5NDE=