CV9 Master Catalog

Specifications subject to change without notice or incurring obligation 11 Directional Control Valves 11-8-04 14, M14 & 34 Series 1/4 & 3/8 NPT 2, 3 & 4 Way 1.75 1.00 .50 .14 Max. 1.13 .44 1/8 NPT .88 See Housing Details Page 11.29 1.75 1.00 .50 1.13 1.34 .31 Dia. See Housing Details Page 11.29 31 2 12 10 3 Way This 3 Way Valve may be used for any 2 Way, 3 Way, Selector or Diverter service. 12 10 2 1.78 1 1.19 2.09 2.88 .20 Dia. Clearance for #10 Screw .56 1.13 1.75 Primary Secondary 3 3.13 .19 .25 2 Way Function 3 1 5 2 4 12 14 4 Way - 5 Port Standard : Single Inlet - Port #1 - Dual Exhaust. 14 12 2 2.53 1 1.94 2.84 3.63 .20 Dia. Clearance for #10 Bolt .56 1.34 1.75 Primary Secondary 3 3.88 .19 .25 1.03 4 1.13 5 3 1 2 14 12 5 4 Note 1: Optional Flow Path : Dual Inlet - Ports #3 & #5 - Single Exhaust. Use External Pilot Supply (Option -X ). Standard 53 STYLE Solenoid Operator The solenoid operator is a 3-way NC valve which, upon receiving an electrical signal, directs a pilot pressure to shift the main valve spool. As standard, the operator is internally supplied with air pressure from the main valve inlet. Also see “External Pilot Supply” below. 53 STYLE Solenoid Operator with External Pilot Supply Option -X In the following listed applications, as well as many others, a proper air supply may not be available from the main valve inlet. For these ap- plications, an external pilot supply port is available (Option -X ). A proper air supply to this port then supplies the solenoid with air pressure for piloting the main valve spool. • Dual Inlet - Single Exhaust 4 Way. • Insufficient pressure at main valve inlet. • Media, at main valve inlet, other than air. • Extremely fast cycling. 53 STYLE Solenoid Operator with Manual Override This manual override is a 3-way NC valve that when pushed, directs pilot pressure to shift the main spool. Pressure must be present at main valve inlet for this override to function. TYPE SUFFIX LOCKING Push to override; -MO1 Turn to lock in; Turn back to release. NON-LOCKING Push to override. -MO4 STACKING - PRESSURE MANIFOLDED Versions of these 1400 Series 1/4 NPT solenoid valves with different adaptor blocks can be stacked and pressure manifolded for space and money savings. The valve bodies are bolted together with 4 through tie bolts and the pressure is manifolded with O-Ring seals between valves. Inlet pressure can be connected to either or both ends of the stack. Due to the fact that the pressure port, on all valve bodies, is tapped on both sides, the pressure manifold can be plugged at any point within the stack. This allows you to supply the stack with two different pressures, one from each end. Versions of the Air Pilot, Rod Actuator, Roller Cam and Small Palm Button valves may be mounted in the same stack along with these solenoid valves. 7/8 Hex .25 .50 .69 Dia. Standard Spring Return 7/8 Hex .25 Light Spring Return Option -L .25 Pilot Return Option -P 1/8 NPT Port See Page 11.13 Pilot Bushing 1/8 NPT 7/8 Hex Spring Return Valves End Operator 10 Spring 12 Solenoid 10 Solenoid 12 Spring Normally Closed Normally Open TO ORDER Specify the quantity of each model desired, the order in which they are to be assembled, and Brackets, if desired. 11.20 Option -X is NOT combinable with either Option -MO1 or -MO4 1.75 1.00 .50 .14 Max. 1.13 See Housing Details Page 11.29

RkJQdWJsaXNoZXIy NDI5NDE=