CV9 Master Catalog

1 Specifications subject to change without notice or incurring obligation Pancake ® Cylinders #1 #2 Sensors available for “D” & “TD” strokes and longer. Strokes D & TD are ported on opposite sides. 60 ° 60 ° .09" Max Wire outlet is in-line with sensor mounting slot 1.31 .75 .75 1.50 1.13 .56 .63 .38 .20 Dia. .50 Dia. .09 Option Specifications 1.20 .17 .042 Stroke Adjustment Per Revolution .06 + B 1/2 Hex Nut Adjusting Screw .25 Hex Stainless Steel Piston Rod 8-32 x .50 .13 .38 .38 + B (for A – J Strokes); .29 + B (for K, L & M Strokes) 1.13 Pilot Dia. = .495 .491 Pilot Length = .06 1/2-20 1/2-20 Thread .72 5/8 .25 1.80 .99 .75 1.50 1.13 .56 .20 Dia. .09 .25 .50 Dia. Suffix Option -RS Adjustable Retract Stroke Available on Original and "T" Series with Actions -X, -O, -OP. Also see Option Information on page 1.11 Strokes 1" & Shorter = .38 Max + Stroke Strokes 1" & Longer = .38 + Adjustment Standard Adjustment is 1". Suffix Option -NR Nonrotating, Single Acting Available on Original and "T" Series with Action -O. Also see Option Information on page 1.8 Suffix Option -MR Male Rod Thread Available on Original and "T" Series with Actions -X, -O, -OP. Also see Option Information on page 1.8 Suffix Option -F Threaded Nose Mount Available on Original and "T" Series with Actions -X, -O, -OP. Also see Option Information on page 1.13 Accessory – Plated steel nose mounting brackets Must be ordered separately Angled Part Number BRK-201 Flat Part Number BRK-202 90 ° Ref. 61 ° A – J .48 + B K – M .38 + B .38 .25 .56 .88 Standard Rod End Brass Clamp Ground Tool Steel Pin is Guided by Precision Hole in End Cap Clearance in Body for Guide Pin .13 .50 Suffix Option -K Nonrotating, Double Acting Available on Original and "T" Series with Action -X, -O, -OP. -OP only use B4 as shown on page 1.18. No additional length is required 1/2" (5) Bore Also See Page 1.18 4-1-08 Suffix Option -E Specifies Magnetic Piston and Dovetail Mounting Slot(s) Strokes are NOT affected by Magnetic Piston Option Quick Reference to Standard Strokes Use the appropriate Stroke Letter in the Model Number 1/2" (5) Bore – Sensors Must be Ordered Separately See Sensor Models Available page 1.14 Note: Alloy steel mounting bolts may effect sensing. Stainless steel or other nonmagnetic bolts are recommended. Sensor Slots at Positions #1 and #2 Sensor Slot at Position #1 only Available on Original Series Action Stroke X 3/8-------------------- D 1/2-------------------- E 5/8-------------------- F 3/4-------------------- G 1 ---------------------- H 1 1/4 ------------------ I 1 1/2 ------------------J 2 ---------------------- K 3 -----------------------L 4 ---------------------- M Available on “T”Series Action Stroke X 1/4-------------TD 3/8------------- TE 1/2------------- TF 5/8-------------TG 1 ---------------TH 1 1/4 -----------TI 1 1/2 ---------- TJ 2 --------------- TK 3 --------------- TL 4 ---------------TM Profile of Sensor & Keyway Slot. Wire is in line with slot. Nut Part No. MC-500-195 is included. Material: Brass Rotational Tolerance with Piston Rod Fully Retracted (Clamp near Body) is ±1°. Cylinder is not intended to carry any rotational load.

RkJQdWJsaXNoZXIy NDI5NDE=