CV9 Master Catalog

1 Specifications subject to change without notice or incurring obligation Pancake ® Cylinders Sensor Slots at Positions #1 and #2 Sensor Slot at Position #1 only 65 ° 65 ° Sensors available for “D” & “TD” strokes and longer. Strokes D & TD are ported on opposite sides. #1 #2 .14" Ref. to 60 wire outlet; Zero stick-out of sensor body 1.26 Option Specifications 3/4" (7) Bore Also See Page 1.24 Accessory Nose Mounting Brackets Order Separately. Material: Plated Steel 4-1-08 Suffix Option -E Specifies Magnetic Piston and Dovetail Mounting Slot(s) Strokes are NOT affected by Magnetic Piston Option Quick Reference to Standard Strokes Use the appropriate Stroke Letter in the Model Number Available on Original Series Action Stroke X, XK 1 3/8 ---------------- D 1/2 -----------------E 5/8 -----------------F 3/4 ---------------- G 1------------------- H 1 1/4--------------- I 1 1/2---------------J 2--------------------K 3--------------------L 4------------------- M Available on“T” Series Action Stroke X, XK 1/4---------------TD 3/8---------------TE 1/2---------------TF 5/8-------------- TG 1 -----------------TH 1 1/4 ------------ TI 1 1/2 ------------TJ 2 -----------------TK 3 -----------------TL 4 ---------------- TM Note 1: For Action XK strokes D–G are decreased by 1/8" for those shown for Original Series.There is no decrease in stroke for “T” Series. 1/4" 60° Dovetail Profile of Sensor & Mounting Slot. 3/4" (7) Bore – Sensors Must be Ordered Separately See Sensor Models Available page 1.14 Note: Alloy steel mounting bolts may effect sensing. Stainless steel or other non-magnetic bolts are recommended. .13 .38 .38 + B (for A – J Strokes) (.29 + B for K, L, M Strokes) 1.50 Pilot Dia. = .620 .615 Pilot Length = .06 5/8-18 Suffix Option -RS Adjustable Retract Stroke Available on Original and “T” Series with Actions: -X, -XK, -O, -OP Also see Option Information on page 1.11. Suffix Option -MR Male Rod Thread Available on Original and “T” Series with Actions: -X, -XK, -O, -OP. Also see Option Information on page 1.8. 5/8-18 .88 .25 3/4 Hex Part No. MC-700-195 Mounting Nut is included Material: Brass Suffix Option -F Threaded Nose Mount Available on Original and “T” Series with Actions: -X, -XK, -O, -OP Also see Option Information on page 1.13. Angled Part Number BRK-301 Flat Part Number BRK-302 .17 .06 + B (-OP Only use B4 as shown on page 1.24. No additional length is required.) 1/2 Hex Nut .042 Stroke Adjustment Per Revolution Adjusting Screw Strokes 1" & Shorter = .38 Max. + Stroke Strokes 1" & Longer = .38 + Adjustment Standard Adjustment is 1" Suffix Option -NR Nonrotating, Single Acting Available on Original and “T” Series with Action -O Also see Option Information on page 1.8. .31 Hex Stainless Steel Piston Rod 10-32 x .50 1.25 .63 .20 Dia. .12 .63 Dia. .90 1.80 2.25 .25 1.25 .69 .44 1.25 .63 .20 Dia. .12 .63 Dia. .90 1.80 1.00 1.75

RkJQdWJsaXNoZXIy NDI5NDE=