CV9 Master Catalog

1 Pancake ® Cylinders Specifications subject to change without notice or incurring obligation 1.49 Option Specifications 2-1/2" (521) Bore Also See Page 1.48 12-15-04 Prefix Option -M Metric Cylinder & Rod Thread 63.5mm Bore Available on Original and “T” Series with Actions: -X, -XK, -O, -OP Also see Option Information on page 1.7. 82.5mm Bolt Circle G1/8 Ports with 14mm Spotface M12 x 25.4 Standard Female Rod Thread M12. Male Rod Thread Option -MR shown. Mounting Holes 6.7mm Diameter Thru 10.3mm C'Bore x 6.4mm Dp. 4 Places for M6 SHCS Thread Pitches M6 = 1.0mm M12 = 1.75mm Conversion Factor Inches x 25.4 = mm The Suffix Options charted on the right are available on Original and “T” Series with the Actions indicated ( ✓ ). They require no di- mensional changes from the Standard Specifications on page 1.48. – Also see Option Information on pages 1.7 thru 1.15. T V Q H N C1–C7 LF LR LFR BF BR BFR P14 -X ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ -XK NA ✓ ✓ ✓ ✓ ✓ NA ✓ NA ✓ ✓ ✓ ✓ -O NA ✓ ✓ ✓ ✓ NA NA ✓ NA NA ✓ NA ✓ -OP NA ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ NA NA ✓ Suffix Options -PM & -SM Clevis Mount Available On Original and “T” Series with Actions: -X, -XK, -O, -OP Also see Option Information on page 1.13. EM-521 Eye Bracket Kit Mates with Clevis Mount shown above. Order separately. EM-121 Eye Bracket Kit Mates with any Rod Clevis shown above. Order separately. .50 .97 1.63 Oil filled bushings Chart .90 .50 1.86 -PM Port Location IN LINE with Slot -SM Port Location 90 ° to Slot Also see page 1.48 Note 1 Chart Action Dimension -X, -O, -OP 1.19 + B -XK 1.00 + B Note 1: Hole Diameter = .501 Pin Diameter = .500 Pin (416 Stainless Steel) and Clips are included. .75 1.13 2.25 .38 2.00 2.00 1.38 Hole .501 Oil filled bushing is standard .47 1.38 1.50 .33 Dia. 4 Places for Flat Head Screws Four 5/16-18 x 1" FHSCS are included Material: Zinc Die Casting .44 .69 1.38 .25 1.50 1.50 1.13 Hole .3135 Oil filled bushing is standard .30 1.13 .94 .27 Dia. 4 Places for Flat Head Screws Four 1/4-20 x 3/4" FH(#12)M Screws are included Material: Zinc Die Casting RC-Chart Rod Clevis and Pin Threaded Stud mates with Female Rod thread in the Pancake ® Cylinders. Slot and Pin Mate with EM-121 Eye Bracket shown below. .32 Pin Diameter .3125 1.69 1.31 1.21 .63 . 61 1.00 Materials: Clevis – Steel, Black Oxide Stud – Steel Pin – 416 Stainless Steel Pin & Clips are included Rod Clevis Number RC-54 RC-56 MRC-54 MRC-56 Strokes AB AA–G MAB MAA–MG Thread Length .39" .62" 9.9mm 15.7mm CHART 1/2-20 x Thread Length Metric M12 x Thread Length Stroke mm 3.2 6.4 12.7 19.1 25.4 38.1 50.8 76.2 101.6 Stroke Letter AB AA A B C D E F G Stroke mm 6.4 12.7 19.1 31.8 44.5 69.9 95.3 Stroke Letter TA TB TC TD TE TF TG Original Series “T” Series

RkJQdWJsaXNoZXIy NDI5NDE=