Multi-Power Air Presses

Provisions for operator protection are always the full responsibility of the user Page 9 Air/Oil Tanks How they work Air-Oil Tanks are used in conjunction with Option –HS Hydraulic Shock Control. These tanks provide a place to contain the fluid that is transferred to and from the power cylinder. One Speed Circuit (below right) Single tank models, used with a flow control valve, give speed control of the hydraulic fluid in one direction, and allow rapid flow in the opposite direction. Thus, when used on an air press, the "ram-down" speed can be slowed to a desired rate leaving "ram- up" at full speed. Use the convenient ordering guide at the right to select the appropriate 4" diameter Air/Oil Tank. Power Stroke Order Part Overall Cylinder Up to Number Tank Height F19 2 SAO-4 x 11 14.00 4 SAO-4 x 14 17.00 6 SAO-4 x 17 20.00 F38 2 SAO-4 x 11 14.00 4 SAO-4 x 14 17.00 6 SAO-4 x 17 20.00 F55 2 SAO-4 x 11 14.00 4 SAO-4 x 14 17.00 6 SAO-4 x 17 20.00 F72 2 SAO-4 x 11 14.00 4 SAO-4 x 14 17.00 6 SAO-4 x 17 20.00 F93 2 SAO-4 x 11 14.00 4 SAO-4 x 14 17.00 6 SAO-4 x 17 20.00 Air-Oil Tank Ordering Guide Overall Tank Height Tank Height Port Port Application Tips Two Speed & Shock Control Single Air/Oil Tank with sequence, needle and shut-off valves give: 1. Rapid "Ram Down" stroke. 2. Automatic switch to controlled rate when resistance is met and pressure builds up. 3. Fluid catches cylinder when built-up forces are suddenly released (such as in punching applications), thus controlling the shock that could otherwise occur. One Speed Circuit A single Air/Oil Tank and flow control valve give hydraulic control with speed control on "Ram Down" with rapid "Ram Reverse." Can be used with your Multi-Power ® Air Press with Option –HS Single Tank Air/Oil Unit Air Supply Muffler Shut-off – 2-way, oil Air Supply Sequence Valve Model No's. RV-1 or RV-2 (see page 10) Power Cylinder Power Cylinder Flow Control Models FC-38 or FC-12 (see page 10) Muffler Directional Control 4-Way Air Valve (See page 10) Single Tank Air/Oil Unit 4. Automatic return to rapid rate on "Ram Up" stroke. This concept can be used with your Multi-Power ® Air Press with Option –HS Always use 2-hand, anti tie-down systems for operator safety! Consult your local distributor for infor- mation and product availability. 12-1-99 Specifications subject to change without notice or incurring obligations Needle Valve Model No's FCB-38 or FCB-12 (see page 10) Directional Control 4-Way Air Valve (see page 10) Please see Section 9 of Fabco-Air Catalog #CV9 for more air-oil tanks and complete specifications. Option Specifications & Accessories

RkJQdWJsaXNoZXIy NDI5NDE=