HHD Series Heavy Duty Hydraulic Cylinders

44 SPECIALS/Engineering Data Specifications and prices are subject to change without notice or incurring obligations. FABCO-AIR, Inc., 3716 N.E. 49th Avenue, Gainesville, FL 32609 • www.fabco-air.com AIR OIL TANKS TANK DIMENSIONS BORE E J S AB AH AL AO AT EE TL 3 1/4 3 3/4 1 1/4 2 3/4 1/2 1 15/16 1 1/4 1/2 1/8 1/2 2 1/2 4 4 1/2 1 1/4 3 1/2 1/2 2 1/4 1 1/4 1/2 1/8 1/2 2 1/2 5 5 1/2 1 1/4 4 1/4 5/8 2 3/4 1 3/8 5/8 3/16 1/2 2 1/2 6 6 1/2 1 1/2 5 1/4 3/4 3 1/4 1 3/8 5/8 1/4 3/4 3 8 8 1/2 1 1/2 7 1/8 3/4 4 1/4 1 13/16 11/16 1/4 3/4 3 Fabco-Air's air/oil tanks are used to obtain smooth hydraulic pressure without the high cost of hydraulic systems. Shop air pressure is applied into the top of the air/oil tanks and then dispenses the oil into the work cylinder. The hydraulic pressure generated is a 1 to 1 ratio. 80 PSI air produces 80 PSI hydraulic pressure (see figure 25-1 on next page). BORE SIZES: 3 1/4, 4, 5, 6, & 8 PRESSURES: up to 200 PSI CONSTRUCTION AND FEATURES: • Lightweight aluminum end caps • High-strength composite tube is also translucent and provides oil level indication without the use of expensive sight gauges • Two air/oil baffles, one installed on both end caps, eliminates oil foaming and provides smooth oil flow into the work cylinder • Tube and o-ring seal positively seals end caps to tube • Side end angle mounts come standard (other mounts available) Mount with axis of tank vertically, either end UP. Port position 2 is standard , note if needed otherwise. 12-7-16

RkJQdWJsaXNoZXIy NDI5NDE=