Linear Slides

Page 19 Specifications subject to change without notice or incurring obligations Step 2: Sensing Options 8-25-08 What tooling will be required? Will stroke adjustability be needed? Step 3 A magnetic piston band is standard on all units (except 250 models) for position sensing. Magnetically operated electronic sensors and reed switches are offered as accessories. Step 2 – RT Rear Toolbar (“L” Series only) – J73B – RT – KE Step 3: Tooling & Stop Options Building the Model Number in 3 Easy Steps – PL Toolplate (“L” Series only) Includes plate, stand offs, and the RT rear toolbar. ▼ ▼ Options for either “L” or “S” Series Stop Collars are used for stroke adjustment. – KE = Stop Collars extend only – KR = Stop Collars retract only – KB = Stop Collars both extend and retract Use of “KR” reduces useable stroke length by thickness (Dim. “T”) of collar. Use of “KE” in conjunction with “PL” or “RT” tooling option (on “L” Series only) reduces available stroke by thickness of collar. Sensor Codes (Use “ S000 ” if NO Sensors are desired) Select a code for sensor type and indicate position Example: J73 E = Extend position only R = Retract position only B = Both extend & retract positions B Magnetically operated sensors are not available on “L” or “S” 250 Models. Proximity Switches can be installed on any model as a special order. Consult factory. * Order cordsets separately as follows: Part No. CFC-1M is 1 meter cable with female connector. Part No. CFC-2M is 2 meter cable with female connector. Part No. CFC-5M is 5 meter cable with female connector. Urethane Bumpers – – UE = Bumpers extend only and stop collars – UR = Retract only, no stop collars – UB = Bumpers both ends with stop collars extend Note: With “PL” or “RT” tooling option (“L” Series only), the stop collar of the “UE” bumper option is deleted because the rear toolbar provides the bumper stop. For pricing, use the cost of a “UR” option in place of the “UE” option (“UE” option includes the cost of bumper washers and the stop collars). Note: On models 750 & smaller, allow for a Urethane thickness of 1/8”. On models 1000 & 1250, allow for a Urethane thickness of 1/4”. Rear Toolbar Stand Off Toolplate Rear Toolbar (4Digits) { "S" Series "L" Series KE KB = BOTH KB = BOTH KR KE KR Dim. T "S" Series "L" Series UE UB = BOTH UB = BOTH UR UE UR Electrical Characteristics 5-120 VDC/VAC, 0.03 Amp Max, 4 Watt Max, 2.0 Voltage Drop Sourcing PNP 6-24 VDC, 0.20 Amp Max, 0.5 Voltage Drop Sinking NPN 6-24 VDC, 0.20 Amp Max, 0.5 Voltage Drop 0-120 VDC/VAC, 0.5 Amp Max, 5 Watt Max, 0 Voltage Drop 9 Ft. Prewired E70 E72 E74 E76 Quick Disconnect * E71 E73 E75 E77 “E” Dovetail Style Sensor Code Sensor Type Reed Electronic Electronic Reed LED Yes Yes Yes No E800 Dovetail Style Mounting Rail (Customer to furnish Sensors) Electrical Characteristics 5-120 VDC/VAC, 0.5 Amp Max, 10 Watt Max, SPST N.O.,3.5 Voltage Drop Sourcing PNP 6-24 VDC, 0.50 Amp Max, 1.0 Voltage Drop Sinking NPN 6-24 VDC, 0.50 Amp Max, 1.0 Voltage Drop 9 Ft. Prewired J70 J72 J74 Quick Disconnect * J71 J73 J75 “J” Clamp-on Style Sensor Code Sensor Type Reed Electronic Electronic LED Yes Yes Yes Specifying –T1 blank toolbar in “Step 1” also designates blank rear toolbar (–RT) Model 250 375 500 750 1000 1250 3-1250 Dimension “T” .28 .34 .41 .50 .50 .50 .50 Clamp-on style pre-wired and quick- disconnect sensors (Dual sensors require 2" or longer stroke). Dovetail style pre-wired and quick-disconnect sensors are compatible with any stroke. Electronic Sensors & Magnetic Reed Switches These sensors are actuated by a magnetic band that is standard on all “L” and “S” Series slides (except 250 Models) and are available in 2 mounting styles – Clamp On or Dovetail in prewired or quick disconnect versions. “J” Style “E” Style

RkJQdWJsaXNoZXIy NDI5NDE=