Linear Slides

Page 22 Specifications subject to change without notice or incurring obligations “L” & “S” Series Linear Slides 1-12-10 Stop Collars: "– KE, –KR & –KB" –PL Toolplate Option ("L" Series Only) Urethane Bumpers: "– UE, –UR & –UB" Optional Toolbars: "–T5, –T6 & –T7" T5 is used on a 750 Model for attaching a 500 Model to create 2-axis motion. T6 is used on a 1000 Model for attaching a 750 Model to create 2-axis motion. T7 is used on a 1250 and 3-1250 Model for attaching a 1000 Model to create 2-axis motion. "S" Series "L" Series KB = BOTH KB = BOTH KE KR Dim. T1 Clearance Flat (except 1250 models) ' U' Outside Diameter T1 Stop Collar KE KR V "S" Series "L" Series UE UB = BOTH UB = BOTH UR UE UR T2 T2 T2 A C B C – 2 E D B – 2 "H" Tap Thru (4) –RT Rear Toolbar Option ("L" Series Only) Low profile switch clamp with side-access clamp screw allows switch repositioning with toolplate in place. A 2.06 2.56 3.38 4.63 6.25 8.50 8.50 L 1.03 1.03 1.13 1.13 1.13 1.13 2.00 K .25 .25 .38 .50 .75 1.00 1.00 H #6-32 #8-32 #10-24 1/4-20 3/8-16 1/2-13 1/2-13 F 1.25 2.00 2.50 3.00 4.00 5.00 5.00 D 1.312 1.625 2.000 2.750 4.000 5.500 5.500 C .56 .69 .75 1.00 1.50 2.00 2.00 T1 .28 .34 .41 .50 .50 .50 .50 Bore 5/16 9/16 3/4 1-1/16 1-1/2 2 3 J 2.88 3.81 5.31 5.88 7.38 9.86 10.06 B .25 .38 .50 .63 1.00 1.25 1.25 E .781 .937 1.187 1.500 2.250 3.062 3.062 Model L or S250 L or S375 L or S500 L or S750 L or S1000 L or S1250 L or S3-1250 T2 1/8 1/8 1/8 1/8 1/4 1/4 1/4 V .25 .31 .44 .56 .75 N/A N/A U .63 .88 1.13 1.50 1.75 2.06 2.06 .625 2.250 1.500 1.187 3/8-16 Tap Thru (2) 1/4-20 Tap Thru (4) #10-24 Tap Thru (2) -T5 -T6 -T7 "H" Thread SHCS (4) E F K L J + (2 x Stroke) B Note: Extend Bumper (–UE) includes Stop Collar as shown Note: If “T1” blank toolbar is specified for front, then rear toolbar will also be blank. Tooling & Stop Options Dimensional Data

RkJQdWJsaXNoZXIy NDI5NDE=