Linear Slides

Page 31 Specifications subject to change without notice or incurring obligations Mounting Style Dimensions 3-Position Tandem Cylinder Models Available on SE500, SE625, SE750, SE1000 and SE1500 2 3 B3 A3 + Stroke of Primary Cylinder + Stroke of Secondary Cylinder F3 + Stroke of Primary Cylinder C3 + Stroke of Primary Cylinder C3 + Stroke of Secondary Cylinder D3 E3 4 1 Dowel Holes Fabco-Air Dowel Holes feature a slip fit dowel hole and a slip fit dowel slot, allowing 2 dowels to be pressed into the mounting surface or the end tooling. This "hole and slot" method provides precision alignment, yet dowel pin cen- terlines do not have to be held at a critical dimension. Dowel holes/slots may be located on any of the five surfaces shown at the right and in blue on the dimension draw- ings on page 30. T #8-32 #10-24 1/4-20 1/4-20 3/8-16 1/2-13 5/8-11 S .13 .62 .50 .50 .87 1.25 1.50 1-20-99 Q .25 .38 .63 .63 .63 .75 1.00 R .13 .25 .50 .50 .75 .75 .75 U .875 1.000 1.562 1.750 2.750 3.250 4.250 W .500 .688 1.125 1.125 1.750 2.125 3.000 Y 1.375 1.625 2.250 3.250 3.250 3.750 6.000 AA .187 .250 .375 .375 .625 .750 1.000 X .19 .19 .38 .38 .50 .63 .50 BB .141 .250 .313 .313 .500 .688 .875 FF #5-40 #8-32 #10-24 #10-24 3/8-16 1/2-13 1/2-13 GG .375 .750 1.250 2.250 1.750 1.750 3.000 HH .50 .38 .88 .88 1.25 1.63 2.00 KK 1.24 1.50 1.47 1.47 2.44 2.94 3.94 ZZ .19 .25 .38 .38 .75 1.00 1.00 Surface #1 Surface #5 Surface #4 Surface #3 Surface #2 V #10-24 1/4-20 1/4-20 1/4-20 3/8-16 1/2-13 5/8-11 Z .50 .75 .75 .75 1.00 1.50 1.50 Integral Option: "–Y" (Hollow Guide Shafts) Tubular guide shafts are available on SE750, SE1000 and SE1500. They can be used to reduce reciprocating weight – or to run air and/or electrical lines through the shafts. Internal Diameters are as follows: SE750 – .44 ± .02 SE1000 – .60 ± .03 SE1500 – .89 ± .05 Tandem Model Dimensions F3 5.50 6.50 7.75 9.12 12.25 Model SE500 SE625 SE750 SE1000 SE1500 B3 4.50 5.50 6.50 7.75 10.25 C3 .75 .75 1.12 1.12 1.50 D3 1.00 1.00 1.25 2.00 2.25 E3 .75 .75 1.00 1.50 2.00 A3 7.75 8.75 11.00 13.50 17.75 .03 (Typ.) Dowel Slot Detail Model SE250 SE375 SE500 SE625 SE750 SE1000 SE1500 Depth .09 .12 .16 .16 .25 .37 .43 B4 Dowel Dimensions Slip Fit for Dowel Size 1/8 3 /16 1/4 1/4 3/8 3/8 1/2 Depth .12 .18 .25 .25 .37 .37 .50 C4 Dowel Dimensions Slip Fit for Dowel Size 3/32 1/8 3/16 3/16 1/4 5/16 3/8

RkJQdWJsaXNoZXIy NDI5NDE=