Bulletin 14CAN

Directional Control Valves 14 Specifications and prices subject to change without notice or incurring obligation 14 & 34 Series 1/4 & 3/8 NPT 4-Way, 3 Position Options for 53 Style Solenoids for Conduit Housing “C ” and Grommet Housing “G” • AC Voltages from 5.4 to 575 in 50 or 60 Hertz • DC Voltages from 3 to 300 • Molded Coil, Option – M Water tight molded coil with Class A221 ° F (105 ° C) Rating. Coil completely molded in epoxy for maximum moisture resistance. NEMA 1, 2, and 3 when in Conduit “C” or Grommet “G” housing. • Potted Coil Option – P Coil is epoxy potted into conduit for “C” housing only. It offers maximum moisture and vibration resistance. NEMA 3R, 3S, 4, 4X, 6, 11, 12, 13 • HIgh temperature Option – H Molded coil with 356 ° F (180 ° C) rating • Viton Seals Option – V (–15 ° to +400 ° F) • Strain Relief Connector Option – Q • “AN” Connector Option – W • Splice Box Option – J • Mounting Bracket Option – R • Third Wire Ground Option – CC A CSA requirement Stocked 53 Style Coils, Housings Conduit Housing “C ” and Grommet Housing “G” Non-molded – Class A 221 ° F (105 ° C) Rating – 24" Leads of AWG #18 Wire Stocked Voltages: 24, 120 and 240 Volt at 50 or 60 Hertz 6, 12 and 24 Volt DC Temperature Range: 0 ° to +180 ° F (–18 ° to +82.2 ° C) including ambient Typical response times: AC 4 to 8 milliseconds to open or close DC 9 to 15 milliseconds to open DC 5 to 12 milliseconds to close Male Mini-DIN Housing “F ” Molded – Water tight Class A 221 ° F (105 ° C) Rating European (DIN) Style – 11 mm spacing for popular quick connectors. Can also be connected with individual .25" quick-connect terminals Stocked Voltages: 24, 120 and 240 Volt at 50 or 60 Hertz 12 and 24 Volt DC Temperature Range: 0 ° to +180 ° F (–18 ° to +82.2 ° C) including ambient Typical response times: AC 4 to 8 milliseconds to open or close DC 9 to 15 milliseconds to open DC 5 to 12 milliseconds to close Features • Aluminum bar body • Anodized black • Honed and burnished bore • Delrin spool • Buna N seals • Cv = 1.0 (56.2 SCFM free flow to atmosphere @ 80 psi supply) • Operation to 150 psi • Pre-lubed with Magnalube–G ® grease Operating Range Internal Pilot Supply - Standard Inlet ............................... 50 to 150 psi External Pilot Supply Option – X Inlet ............................... 0 to 150 psi Pilot Supply ................... 50 to 150 psi Ordering Choose valve model number from table below, add option suffixes as required and specify voltage/hertz. • Yoke with standard coil, Option – YB • Yoke with molded coil, Option – YM • Yoke with molded spade terminal coil, Option – KM Yoke replaces housing for protected and control box applications. Molded coil with two .25" spade terminals for quick assembly and disconnect. • Explosion Proof Option – EP UL File #E37780 CSA File #LR-26894 for hazardous locations includes molded coil UL Class I Groups C & D UL Class II Groups E, F & G NEMA 7C, 7D, 8C, 8D, 9E, 9F & 9G Options for 53 Style Solenoids for Male Mini-DIN Housing “F ” • Viton Seals Option –V (–15 ° to +400 ° F) Model 14-FFB Shown 1/4 NPT & 3/8 NPT Ported, 53 Style Solenoid Controlled, Pilot Operated Air Valves 5 Ported, 3-Position 4-Way Operation 4-7-06 Conduit Housing “C” Grommet Housing “G” Male Mini-DIN Housing “F” Replacement Spool Type 1/4 NPT Ports 3/8 NPT Ports 1/4 NPT Ports 3/8 NPT Ports 1/4 NPT Ports 3/8 NPT Ports B Spool 14-CCB 34-CCB 14-GGB 34-GGB 14-FFB 34-FFB 1400-904B F Spool 14-CCF 34-CCF 14-GGF 34-GGF 14-FFF 34-FFF 1400-904F Model Number Guide: 4-Way, 3-Position, Spring Centered Double Solenoid Valves Spool & Seals

RkJQdWJsaXNoZXIy NDI5NDE=