CV9 Master Catalog

Specifications subject to change without notice or incurring obligation 5 5.15 8-14-08 Pancake ® — Multi-Power ® Thread AC AF T Threaded Nose Mount Option -F Available on 1/2" to 1-5/8" Bore Models Plated steel nose mounting brackets Must be ordered separately F G A -PM Port locations in line with slot H -SM Port locations 90˚ to slot C E D L + Dim. B See pages 5.13 & 5.14 Clevis Mount Option -PM & -SM AA -EPM Port locations in line with tang H -ESM Port locations 90 ° to tang C E D L + Dim. B See pages 5.13 & 5.14 F Pivot Mount Option -EPM & -ESM (Available 1/2" thru 2" Bore) Male Rod Thread Option Single Rod -MR Double Rod, Rod End Only -MR Double Rod, Cap End Only -MR1 Double Rod, Both Ends -MR2 .38 .13 .38 + B See page 5.13 Thread Pilot D Dia. x .06 long .75 .14 Pilot D Dia. x .13 long .25 1.99 Thread 1.00 + B See Page 5.13 Nut is included. 1/2" & 3/4" Bores 1-1/8" & 1-5/8" Bore Thread Rod High Strength Stud Loctite ® No Relief No Weakness Bore Thread 1/2" 8-32 x .50 3/4" 10-32 x .50 1-1/8" 5/16–24 x .75 1-5/8" 3/8–24 x .88 2" 1/2–20 x 1.00 2-1/2" 1/2–20 x 1.00 3" 1/2–20 x 1.00 4" 5/8-18 X 1.25 Bore 1/2" 3/4" 1-1/8" 1-5/8" 2" 2-1/2" 3" 4" A .25 .25 .31 .38 .38 .50 .50 .63 F 0.63 0.63 1.00 1.25 1.25 1.63 1.63 2.00 C 0.41 0.41 0.69 0.69 0.69 0.97 0.97 1.22 D 0.34 0.34 0.56 0.68 0.68 0.90 0.90 1.06 E Hole .251 .251 .3135 .376 .376 .501 .501 .626 E Pin .250 .250 .3125 .3750 .3750 .500 .500 .625 G 0.83 0.83 1.21 1.48 1.48 1.86 1.86 2.24 H .25 .25 .37 .37 .37 .50 .50 .63 AA .23 .23 .30 .35 .36 NA NA NA L 0.56 0.56 0.94 1.00 1.00 1.38 1.38 1.75 Pro-Coat™ Option -N Electroless Nickel plating Consult Engineering for specific application requirements F FC W/2 W C C/2 .20 Dia. T .25 D BRK-202 & BRK-302 H HC W/2 W C L LC .20 Dia. D Dia. T C/2 BRK-201 & BRK-301 Electroless Nickel plating is a hard, smooth, corrosion & wear resistant coating that will often suffice for applications where stainless steel is specified. The coating is a high nickel low phosphorous alloy deposited by chemical reduction without electric current that is more corrosion resistant than plated nickel. Its lasting luster provides high eye appeal. It has natural lubricity & high resistance to abrasion. Standard hardness of the coating is approximately 49 Rockwell C. Heat treating can increase hardness to 60 Rockwell C. Bore 1/2" 3/4" 1-1/8" 1-5/8" AC 0.72 0.88 1.59 1.88 Nut Part No. MC-500-195 MC-700-195 12100-195 22100-195 D Pilot .495-.491 .620-.615 1.000 -.995 1.250-1.245 AF 0.63 0.75 1.38 1.63 T .25 .25 .19 .25 Thread 1/2" – 20 5/8" –18 1" –14 1 1 /4 "-12 Bore 1/2" 1/2" 3/4" 3/4" Part No. BRK-201 BRK-202 BRK-301 BRK-302 C 1.13 1.13 1.25 1.25 HC .75 – 1.00 – H 1.31 – 1.75 – T .09 .09 .12 .12 F – 1.80 – 2.25 D .50 .50 .63 .63 W 1.50 1.50 1.80 1.80 FC – 0.99 – 1.25 L .63 – .69 – LC .38 – .44 –

RkJQdWJsaXNoZXIy NDI5NDE=