CV9 Master Catalog

6 Specifications subject to change without notice or incurring obligation Electrical Characteristics 5-120 VDC/VAC, 0.5 Amp Max., 10 Watt Max., SPST N.O., 3.5 Voltage Drop Sourcing, PNP, 6-24 VDC, 0.5Amp Max., 1.0 Voltage Drop Sinking, NPN, 6-24VDC, 0.5Amp Max., 1.0 Voltage Drop Quick Disconnect Part Number. 9-2A197-1304 9-2A197-1333 9-2A197-1334 Prewired 9 ft. Part No. 9-2A197-1004 9-2A197-1033 9-2A197-1034 Product Type Reed Switch Electronic Electronic LED Lighted Magnetic Piston Position Sensors: 2 1/2" Bore 5-240 VDC/VAC, 1 Amp Max., 30 Watt Max., SPST N.O., 3.0 Voltage Drop Sourcing, PNP, 6-24 VDC, 1.0 Amp Max., 0.5 Voltage Drop Sinking, NPN, 6-24 VDC, 1.0 Amp Max., 0.5 Voltage Drop 749-000-504 749-000-531 749-000-532 749-000-004 749-000-031 749-000-032 Reed Switch Electronic Electronic 9-2A197 Series Sensor Mounting Clamps – Part Number 800-200-000 LED Lighted Magnetic Piston Position Sensors: 4" Bore 749 Series Sensor with Integral Clamp for 4" Bore Boosters (shown prewired) • Option -E consists of amagnet bonded into thepistonhead.When the piston magnet moves past an external sensor, the magnetic field activates the sensor without physical contact. • Mounting –The sensor is attached to a 2-part clamp that attaches rigidly to a tie rod and can be positioned anywhere along the length of the cylinder for very precise signaling. • Two sensor styles are used – (a) the 9-2A197 Series for 2 1/2" bore requires a tie rod clamp, and (b) the 749 Series which accom- modates the larger diameter tie rods of the 4" bore with an integral clamp. • Reliability – The annular piston magnet is permanently bonded into a groove in the piston. It is a polarized permanent magnet of rubber bonded barium ferrite that is very stable and is not affected by shock. Under normal usage it will remain magnetized indefinitely. • Warning – External magnetic fields and/or ferrous objects may affect the strength of the piston magnet therefore affecting sensor actuation and piston position indication.Labels noting this are affixed to the cylinder. • Please note there is an increase in base length of the booster to accommodate the magnet. The driving end stage only, is increased by 1". 9-2A197 Series Sensor & Clamp for 2 - 1/2" Bores Socket Head Screw Integral Clamp Piston Magnet, Rubber Bonded Barium Ferrite Tie Rod, Stainless Steel Cylinder Head Cylinder Tube T Sensor WARNING This cylinder is equipped with a Magnetic Piston for use with Magnetically Operated Sensors. Other Magnetic Sensitive Devices Should be Kept at a Distance to Avoid Inadvertent Operation. 5-21-13 Sensor & Clamp Ordering Guide Warning! Do not exceed sensor ratings. Permanent damage to sensor may occur. Power supply polarity MUST be observed for proper operation of sensors. See wiring diagrams included with each sensor. Length 1 Meter 2 Meter 5 Meter Part No. CFC-1M CFC-2M CFC-5M Female Cordsets for 9-2A197 Series Quick Disconnect Sensors Female Cordsets for 749 Series Quick Disconnect Sensors Length 2 Meter 5 Meter Part No. CFC-2M-12 CFC-5M-12 4" Bore Female Cordsets available in 1, 2, & 5 meter lengths 2-1/2" Bore Sensor Clamp Piston Magnet Tie Rod, Stainless Steel Cylinder Head Cylinder Tube T Sensor T 9 foot prewired sensor Booster Model Number BA 2 1/2 X 2 X 2 RF – E – PR2 Quick Disconnect Sensor Temperature Range : –20° to + 80°C (–4° to + 176°F) Sensor housings rated NEMA 6/IP67. 6.7 Multi-Power ® Boosters Bore 2-1/2" 4" T .38" .36" Sensor Clamp Stick Out Dimensions Magnetic Piston Option -E (Order Sensors and Sensor Clamps Separately)