CV9 Master Catalog

1 Pancake ® Cylinders Specifications subject to change without notice or incurring obligation 1.31 Option Specifications 1-1/8" (121) Bore Also See Pg. 1.30 T V Q H N C1–C7 LF LR LFR BF BR BFR -X ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ -XK NA ✓ ✓ NA ✓ ✓ NA ✓ NA ✓ ✓ ✓ -O NA ✓ ✓ ✓ ✓ NA NA ✓ NA NA ✓ NA -OP NA ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ NA NA The Suffix Options charted on the right are available on Original and “T” Series with the Actions indicated ( ✓ ). They require no dimensional changes from the Standard Specifications on page 1.30. – Also see Option Information on pages 1.7 thru 1.15. .37 .57 Oil filled bushing .81 + B .56 .30 -EPM Port Location IN LINE with Tang -ESM Port Location 90 ° to Tang See Page 1.30 .3135 1.00 Suffix Options -EPM & -ESM Eye Mount Available on Original and “T” Series with Actions: -X, -XK, -O, -OP Also see Option Information on page 1.13. .37 .69 1.00 Oil filled bushings .81 + B .56 .31 1.21 -PM Port Location IN LINE with Slot -SM Port Location 90 ° to Slot See Page 1.30 Note 1 Note 1: Hole Diameter = .3135 Pin Diameter = .3125 Pin (416 Stainless Steel) and Clips are included Suffix Options -PM & -SM Clevis Mount Available on Original and “T” Series with Actions: -X, -XK, -O, -OP Also see Option Information on page 1.13. Prefix Option -M Metric Cylinder & Rod Thread, 28.5mm Bore Available on Original and “T” Series with Actions: -X, -XK, -O, -OP Also see Option Information on page 1.7. 42.8mm Bolt Circle G1/8 Ports with 14mm Spotface M8 x 19.0 Standard Female Rod Thread M8. Male Rod Thread Option -MR shown. Mounting Holes 5.3mm Diameter Thru 8.8mm C'Bore x 5.3mm Dp. 2 Places for M5 SHCS Except strokes J, K, TJ & TK which have two M5 x 12.0mm Dp. Tapped Mounting Holes on each end. Thread Pitches M5 = 0.8mm M8 = 1.25mm Conversion Factor Inches x 25.4 = mm Stroke mm 3.2 4.8 6.4 12.7 19.1 25.4 31.8 38.1 44.5 50.8 76.2 101.6 Stroke Letter A B C D X E F G H I J K Stroke mm 1.6 3.2 9.5 15.9 22.2 28.6 34.9 41.3 47.6 73.0 96.4 Stroke Letter TB TC TD TX TE TF TG TH TI TJ TK Original Series “T” Series 2-13-08 EM-04 Eye Bracket Kit Mates RC-31 Rod Clevis shown on the left. EM-121 Eye Bracket Kit Mates with Clevis Mount above. Order separately. Materials: Clevis – Steel, Black Oxide Stud – Steel Pin – 416 Stainless Steel Pin & Clips are included .25 Pin Diameter .250 5/16-24 Optional Metric #MRC-31 M8 x 9.7mm 1.16 .88 .96 .50 .39 .75 PM-121 Clevis Bracket Kit Mates with Eye Mount above. Order separately. .88 1.13 1.50 .94 1.32 Hole .3135 Pin .3125 Pin (416 Stainless Steel) & Clips are included. Oil Filled Bushings are Standard. .69 .46 1.21 1.00 .27 Dia. 4 Places on Square Pattern for Flat Head Screws. Four 1/4-20 x 3/4" FH(#12)M Screws are included. .31 .25 Material: Zinc Die Casting .44 .69 1.38 .25 1.50 1.50 1.13 Hole .3135 Oil filled bushing is standard .30 1.13 .94 .27 Dia. 4 Places for Flat Head Screws Four 1/4-20 x 3/4" FH(#12)M Screws are included Material: Zinc Die Casting .31 .41 .87 .16 1.25 1.25 .88 Hole .251 Oil filled bushing is standard .23 .88 .56 .27 Dia. 4 Places for Flat Head Screws Four 1/4-20 x 3/4" FH(#12)M Screws are included Material: Zinc Die Casting RC-31 Rod Clevis and Pin Threaded Stud mates with Female Rod thread in Pancake ® Cylinders. Slot & Pin Mate with EM-04 Eye Bracket shown on the right.

RkJQdWJsaXNoZXIy NDI5NDE=