FAQR ISO 6431 Cylinders

Page 2 FAQR Series 9-8-09 Features Standard Strokes (mm) available for all bore sizes FAQR 50 LB 25 50 75 100 125 150 175 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 Series Stroke Mounting Non-standard strokes are avail- able on request FAQR Standard type FAQRW Double rod CA Eye mount CB Pivot mount includes pin CBB Eye mount base combined with pivot mount (see pg. 6) LB Foot mount TC Trunnion FA / FB Front / rear flange Not required or use ISO VG32 Single rod Double rod Compressed air FAQR FAQRW Series Min. Max. 0.07 MPa (0.7 kgf/cm 2 ) 10 psi 1MPa (10.5 kgf/cm 2 ) 150 psi 50~500mm/sec. (1.97~19.7 in./sec.) –10°C (14°F) ~ +70°C (158°F) filtered dry air required at temperatures below 0°C (32°F) 150 psi max. 1. Magnetic piston is standard in all sizes. 2. Adjustable air cushions at both ends are standard in all sizes. 3. ISO 6431 dimensional interchange. 4. Machined male rod thread with jam nut is standard in all sizes. 5. Hard anodized aluminum cylinder tube I.D. & O.D. Painted end caps. 6. Cylinders can be operated with or without additional lubrication. 7. Position sensors ordered separately ( see page 5). Mounting brackets fit over any of four extruded housing rails. Conversions psi = kgf/cm 2 x 14.2 psi= MPa x 145 inch = mm x 0.0394 lb force = N x 0.22 Conversions Force lb = psi X in 2 N = lbf X 4.45 Push Pull Bore (mm) cm 2 in 2 cm 2 in 2 32 8.0 1.25 6.9 1.1 40 12.6 1.95 10.6 1.64 50 19.6 3.04 16.4 2.56 63 31.2 4.83 28.0 4.35 80 50.3 7.79 45.4 7.03 100 78.5 12.17 73.6 11.4 125 122.7 19.0 113.1 17.5 Effective Piston Areas 40 Bore (mm) Tapped holes at both ends – leave blank 9-2A197 Series Sensors Order sensors, mounting brackets and cord sets separately. See page 5. Position Sensors Specifications and prices subject to change without notice or incurring obligation.

RkJQdWJsaXNoZXIy NDI5NDE=