Multi-Power Air Presses

Provisions for operator protection are always the full responsibility of the user Page 4 Multi-Power ® Air Presses F19 F38 F55 F72 F93 Formulas for "F" Dimension Stroke + 2.22 2 x Stroke + 3.35 3 x Stroke + 4.47 4 x Stroke + 5.60 5 x Stroke + 6.72 Total effective piston area † 19.6 sq in 38.0 sq in 56.4 sq in 74.8 sq in 93.2 sq in Maximum operating Pressure 150 psi 150 psi 150 psi 150 psi * 120 psi * 110 psi ‡ 90 psi ‡ Force @ max. oper. pressure 2940 lb 5700 lb 8460 lb 11,220 lb * 11,184 lb * 8,228 lb ‡ 8388 lb ‡ Force output = effective piston area x operating pressure Force for retracting ram = 18.4 sq in x operating pressure Dimensional Data † For –AS Option, area is reduced by 1.2 Sq. in. *For open widths: 5-1/2" & 7" ‡ For open widths 9", 10", 11" DIM DIM Power O Stroke + Weight Cyl. No. Weight Per inch F19 14.4 0.9 F38 16.5 1.5 F55 18.6 2.1 F72 20.7 2.7 F93 22.8 3.3 For other Open Widths if 7", add 1.7 lbs. if 9", add 3.9 lbs. if 10", add 5.0 lbs. if 11", add 6.1 lbs. Specifications subject to change without notice or incurring obligations 5-2-06 Multi-Power ® Press Configurations SPEED F38x1: 120 CPM F55x1: 90 CPM These cycle rates are based on the cylinder travelling full stroke, allowing full pressure build up, and sufficiently sized valving, plumbing, and air supply. 6.00 9.25 Base Plate Position 1 Base Plate Position 2 1.63 1.75 3/8–16 x .75 Dp., 2 Places Base Mounting Holes 1.63 1.75 E 10 ° 30 ° 1.75 2.75 4.50 1.00 1.00 6.50 3/8 NPT, Retract Port (18.4 sq. in. area) Frame Bolts: 3/8–16, 4 Places Each Side (Torque 45 ft-lbs.) 5.25 Dia. 3/8 NPT Port Power Extend 7.00 Dia. 11.75 11.00 D B A C .56 F – See formula in Power Cylinder Selection Guide below .75 Base Plate Mounting Surface Note: 5 Open Widths are available Note: Extra holes in frame Provide 2 Base Locations Note: 4 Frame Heights are available Power Cyl. Weights (lbs) for 5-1/2" Open Width Weights (lbs) Frame , Keys & Bolts 10" 13.6 14" 18.0 16" 20.0 18" 22.0 Bases 5-1/2" 8.6 7" 11.0 9" 14.1 10" 15.7 11" 17.2 Frame Plate Height 10 14 16 18 D 6.31 10.31 12.31 14.31 E 10.00 14.00 16.00 18.00 Open Widths Available 5-1/2 7 9 10 11 A 5.50 7.00 9.00 10.00 11.00 B 2.75 3.50 4.50 5.00 5.50 C 7.00 8.50 10.50 11.50 12.50 Power Cylinder Selection Guide & "F" Dimension Formula

RkJQdWJsaXNoZXIy NDI5NDE=