Linear Slides

Page 76 Specifications subject to change without notice or incurring obligations “TS” Series Dimensional Data Vertical Shaft View Horizontal Shaft View Bolt-on Options Specify Left Hand , Right Hand , or Both with “ L ”, “ R ”, or “ B ” in boxes ( ). Use “dashes” to separate options. – H2R – H3L – RPB Step 3: Bolt-on Options Retainer Plate RP Retainer plate. Must be used in conjunction with "TGS" option and one of the accessory blocks. Horizontal Shaft Mounting Block H1 without stop bolt H2 with stop bolt (shown) See Note 1 Shaft Clamp Block with Stop Bolt H3 Stop bolt is used for stroke adjustment. See Note 1 Vertical Shaft Mounting Block V1 without stop bolt V2 with stop bolt (shown) See Note 1 ▼ Cannot be used with top ports, with top proximity switch bracket, or with "J" Style sensor options Retainer Plate “TS” Series Linear Slides 7-19-99 Note 1 : The aluminum end caps of the TS slide cannot be used as a stopbolt contact surface. A steel stop plate must be used. Specify either Integral Option “SP” or Prox Option “S01 – S42” Tooling Mounting Plate PL V Tooling mounting plate and pair of vertical shaft mounting blocks. PL H Tooling mounting plate and pair of horizontal shaft mounting blocks. In first box ( ) use an “A” to specify Aluminum, or an S “ to specify Steel. In the second box ( ) use “ 1 ” meaning without Stop Bolt, or a “ 2 ” meaning with Stop Bolt. Corner Port Locations (“MH1, MH2, MV3, MV4”) On-Center Port Locations (“MH3, MH4, MV1, MV2”) V “P” Port V W "P" Port T – Thread U – Depth Shaft ends ground flush to each other F Tapped Guide Shafts (Code “–TGS ”) .03 Typ Slip Fit Slot for "Y" Dia. Dowel x "Z" Depth Mounting Surface Slip Fit Hole for "Y" Dia. Dowel x "Z" Depth Dowel Slot “Dowel Hole/Slot Option (Code “–D ”) for “MH” & “MV” mounting styles D 1.38 1.44 1.81 2.19 2.44 3.13 BB 1.125 1.500 1.875 2.000 2.500 3.250 A 3.50 4.25 5.13 5.88 6.50 8.25 AA 3.94 4.75 5.88 6.75 7.50 9.38 Model TS112 TS150 TS200 TS250 TS325 TS400 Bore 1-1/8 1-1/2 2 2-1/2 3-1/4 4 B .969 1.125 1.562 1.875 2.000 2.750 C 1.562 2.000 2.000 2.125 2.500 2.750 CC 2.000 2.750 3.375 4.000 5.250 6.250 DD 1.81 1.94 2.56 3.06 3.44 4.25 Shaft Dia. S .249 .374 .499 .624 .749 .999

RkJQdWJsaXNoZXIy NDI5NDE=