SC Swing Clamps

Page 4 Magnetic Piston is a standard feature of Fabco-Air swing clamp cylinders. When position sensing is desired for input to signal controllers, Fabco-Air sensors mount easily and securely inslots on the cylinder body. 7-23-07 4.5 Reed Style 5.8 Electronic Style LED Indicator LED Indicator 13.0 to center of Sensing Area for Reed Style 7.0 to center of Sensing Area for Electronic Style 9 ft. 25 6 in. 8mm Male Quick Connect ø 3.8 Round Profile Sensors feature surge sup- pression, polarity protection, LED indicator, and extremely fast switching speeds. They slide into mating 4mm keyhole slots on either side of the cylinder block and are easily po- sitioned and locked in place with a set screw. They are offered in two styles: a quick con- nect style with a 6 inch pigtail and male con- nector, or a prewired style with a 9 foot lead. Female Cordsets are available in 3 pin con- figuration in 2 and 5 meter lengths. Order sensors and cordsets separately from the tables below. Sensor Dimensions (mm unless noted) Cordset Description 2 meters, 3-Pin 5 meters, 3-Pin Part No. CFC-2M CFC-5M 8mm Female Cordsets for Quick Connect Sensors 3 pin cordset shown with sensor pigtail Prewired sensor shown with 9 ft. lead All sensors feature surge supression, polarity protection, LED indicator, and extremely fast switching speeds. FABCO-AIR 0UJ O • 3716 N.E. 49th Avenue • Gainesville, FL 32609 • Tel (352) 373-3578 • Fax (352) 375-8024 • E-Mail: fabco@fabco-air.com • Web Site: www.fabco-air.com Specifications and pricing subject to change without notice or incurring obligation Magnetically Actuated Sensors – 4mm keyhole slots for mounting (sensors shown on ø63 bore – 8 places) Rod end view showing 4mm keyhole slots on a ø32 bore clamp cylinder Magnetic Sensors – Electrical Characteristics Part Numbers Switching Speed 0.5 ms operate 0.1 ms release 1.5µs operate 0.5µs release 1.5µs operate 0.5µs release Switching Power 4 Watts max. 6 Watts max. 6 Watts max. Prewired 9 ft. Part No. 9C49-000-002 9C49-000-031 9C49-000-032 Quick Connect Part No. 9C49-000-302 Requires 3 pin cordset 9C49-000-331 Requires 3 pin cordset 9C49-000-332 Requires 3 pin cordset Switching Voltage 5-120V AC/DC 50/60 Hz 6-30 VDC 6-30 VDC Switching Current 0.04 Amp max 0.005 Amp min. 0.2 Amp max. 0.2 Amp max . Voltage Drop 2.5 Volts 1.5 Volts 1.5 Volts SensorType Reed Switch for PLC’s w/LED (current limiting) Electronic LED and Sourcing Electronic LED and SInking Function SPST Normally Open PNP Normally Open NPN Normally Open

RkJQdWJsaXNoZXIy NDI5NDE=