Tech Tips - Selecting Pneumatic Linear Slides for Automation Projects

sponsored by: 2-axis motion Linear slides can be joined together to create 2-axis motion by using available toolbars and transition plates. In Figure 9A, the bearing block of the vertical slide is bolted to the toolbar of the horizontal slide. Optional, no-cost toolbars are available for mixing and matching dissimilar slide models. Figure 9B shows how a transition plate is used to join two SE Series slides to create an extremely compact thin parts placer. The bearing block of the vertical unit is bolted to the transition plate mounted to the toolbar of the horizontal unit. Grippers or tools are then mounted to the toolbar of the vertical slides. See Figure 11. Figure 9a Figure 9b 10

RkJQdWJsaXNoZXIy NDI5NDE=